In short

Flying Carpet Cleaning NJ cleans wall to wall carpet in Jersey City, New Jersey, and across Hudson County. A visit starts with a look at the fiber and the spots, then pre treatment and hot water extraction or a low moisture method. Drying time depends on the season and the carpet, and quotes are free with no obligation.

Carpet cleaning in Jersey City: what to know

More than half of Jersey City homes, 54 percent, are in buildings of five units or more, so wall to wall carpet here is often cleaned several floors up, beside a hallway that other people use. We look at the fiber and the wear first, treat the spots and the traffic lanes, and then clean the carpet. Most of the time that means hot water extraction, the method commonly known as steam cleaning, and a low moisture method takes its place when the carpet calls for less water. Halls and stairs soil faster than bedrooms and usually need the most attention. Before we arrive, clear the floor of small things such as floor lamps and plants, and walk the rooms once to note the spots you care about most, so that nothing is missed when we look at the carpet together.

A cleaning visit in Jersey City

The first thing we ask in Jersey City is how we reach your door. In a tower, check with the management office about a service elevator and whether outside work has to be booked ahead, since some buildings keep set hours for it. In a brownstone or a two family house, tell us how many flights there are and whether the stairs turn. Street parking is limited on many blocks, so mention a driveway, a garage or a loading area if you have one. Drying usually takes a few hours. It goes faster with windows open or the air running and slower in damp weather or on thick fiber.

How a carpet cleaning visit goes

  1. We look first

    We walk the rooms with you, check the fiber and note the traffic lanes, the spots and any pet areas.

  2. We treat the trouble spots

    Stains and traffic lanes are treated before the main cleaning, so the solution has time to work.

  3. We clean

    Hot water extraction or a low moisture method, chosen for the carpet in front of us.

  4. We set it up to dry

    We groom the pile, tell you what drying time to expect for the season and how to shorten it.

What we clean
Wall to wall carpet in bedrooms, living rooms, halls and on stairs, in homes and businesses
How
Hot water extraction (steam cleaning) or a low moisture method, chosen for the fiber
Drying
Often within hours in warm weather. Dense carpet in cold or humid weather can take up to 48 hours
Quote
Free, based on the rooms, the stairs and the condition
When
Open 24 hours, every day

Carpet cleaning in Jersey City: questions, answered

Can you clean carpet and furniture in a Jersey City high rise?

Yes. Large buildings are a big part of the city, with 38 percent of homes in buildings of 20 units or more. Before you book, ask the management office if outside work needs a reservation or a service elevator, then give us the floor and tell us where a van can stop.

How often should carpet be professionally cleaned?

Every 6 to 12 months suits most homes. Homes with pets, small children or heavy foot traffic do better closer to every 6 months, and a guest room that is rarely used can wait longer.

How long does carpet take to dry after cleaning?

It depends on the season. In warm, dry weather carpet is often dry within hours. In winter or in humid weather, and with thick or dense pile, it can take up to 48 hours. Moving air shortens it: open windows when the weather allows, run a fan or the heating, and keep furniture legs off damp carpet.

Will steam cleaning shrink or damage my carpet?

Not when the method fits the fiber. Synthetic carpet tolerates hot water extraction well. Wool and specialty carpet get cooler water and less of it, or a low moisture method, which is why we check the fiber before we start.

Can you remove pet stains and smells from carpet?

Often, when the urine is recent and sits in the pile. Old or repeated accidents that reached the pad or the subfloor are harder, and cleaning the surface may improve them without removing them. We tell you what is realistic after we look.